Services
Software for the assessment. Engineers for the project.
InfraSimX develops software for structural design, ASCE 41 seismic evaluation and FEMA P-58 loss assessment, and provides structural, geotechnical and seismic engineering for buildings and infrastructure.
Evaluate the building yourself.
Assess existing buildings to ASCE 41-17 and ASCE 41-23 using linear and nonlinear, static and dynamic procedures — with the demands, capacities and calculations behind every result available for inspection.
See the softwareOr have our engineers carry it out.
Assessment, design and simulation delivered by our own engineers, for projects where the work is handed over rather than run in-house.
Talk to our engineersOne program, from design to repair cost.
Seismic performance evaluation
Assess an existing building against Immediate Occupancy, Life Safety or Collapse Prevention, and identify the governing actions and the demands behind them.
Linear and nonlinear analysis
Run the procedure the assessment calls for — static or dynamic, linear or nonlinear — and compare results across solvers.
Loss assessment with FEMA P-58
Turn structural response into damage states, repair cost and repair time, carried through Monte Carlo so the result is a distribution rather than a single number.
Plastic hinges from the code
Hinge backbones and acceptance criteria generated automatically from the standard’s tables for the section, material and action — not entered by hand.
Member design
Design checks to AISC 360 for steel and ACI 318 for concrete, with ASCE 7 load combinations and the calculation behind the governing result open.
Drawings and reports
Generate connection drawings, detail sheets and calculation reports from the checks you have run.
Structural, geotechnical and seismic engineering.
Seismic evaluation and retrofit
Systematic evaluation of existing buildings to ASCE 41, identification of deficient components, and the retrofit scope that follows from them.
Structural analysis and design
Industrial and commercial structures, concrete dams, and gas and water pipelines, from concept through to fabrication-ready drawings.
Geotechnical engineering
Foundation design, soil–structure interaction and site characterisation for projects where the ground governs.
Site response analysis
Ground motion selection and site-specific response, where a code spectrum does not represent the site.
Numerical simulation
Finite element modelling for problems the standard procedures do not cover — nonlinear behaviour, staged construction, complex geometry.
Risk assessment
Structural risk for complex projects and building portfolios, with the basis of each finding stated.
Where the work is.
- Existing buildings and seismic retrofit
- Industrial facilities, including oil and gas
- Commercial and institutional buildings
- Concrete dams
- Gas and water pipelines
Start with the software, or with our engineers.
Request a demo of InfraSimX, or tell us about the structure you need assessed.